| | | | | | |
Thiết bị Tàu sông, biển Thiết bị Tàu cá Động cơ điện & Bơm Thiết bị công nghiệp Thiết bị khác
Động cơ điện & Bơm
AC Motor
VIFA Motor
Siemens Motor
DC Motor
Motor giảm tốc
Motor cao áp
Hộp giảm tốc
Giảm tốc trục vít bánh vít
Máy bơm công nghiệp
Bơm chân không Cutes
ZSN4 DC Motor
ZSN4 DC Motor

ZSN4 Cement Turning Round DC motor

General Descriptions:

The ZSN4 series DC Motors are dominant products of our factory. The products are found wide use for cement machinery, ZSN4 series DC Motor design upon our Z4 series DC motor to manufacture. According Cement Turning Round making specialty to exploitation

Working Conditions:

1, Alititude above sea level maximal 1000m
2, Cooling air temperature maximal 40’C
3, Ambient conditions for motors should be free from acidic, Alkali fumes or other aggressive gases which corrode insulation
4, Armature and field circuit for motors may be either operated on static thyristor controlled supplies. Or from DC generator
5, Performances of motors all comply with state standard GB755 ¡¶fUNDAMENTAL TECHNICAL RULES FOR ELECTRSCAL MACHINES

Products performance:
Motor Frame: IEC ZSN4-225~ZSN4-355
Output(KW): 40kW~355kW
Rated Voltage(V): The sandard rated voltage of this series motors are 160V or 440V, Values for 220V or 400V or other voltage may be derived on request
Excitation Type: Separate excitation is the basic excitation type of this series motors, Nominal field voltage:180V, Other excitation voltage are also acceptable on request. To assure the reliablity of insulation of excitation system, The motor must be protected againse self-indued voltages by a release resistor connected in parallel with the field winding when the excitation circuit of the motor is interrupted, At rated field winding resistance(cold). While the field voltage is higher than nominal voltage, The value of shunt resistance may be lower than seven-times fields resistance. Otherwise higher than seven-times.
Raged Speed(rpm): 1500r/min, 1000r/min, 750r/min
Insulation Class: CLASS F
Protection Class: IP21S and IP44 is adopted for the motors protections of this series
Mounting Type: IMB3, IM35
Duty: Continuous working system(S1) is applied
Methods of Cooling: IC17, IC37, Other types of protection and cooling required by customers can be negotiated.


Sản phẩm khác

Công ty Cổ phần Công nghệ Thiết bị Việt Nam
VPGD: 389 Trương Định, Quận Hoàng Mai, Hà Nội
Tel: 04 36628835/36628836;Fax: 04 36628837
Email: info@vimatek.com.vn

Designed by Thietkeweb - Seo